Fingerprint Padlock, Keyless Smart Biometric Fingerprint Door Lock for School Gym Locker, Metal Waterproof Ultra Light Thumbprint Lock, Anti-Theft, USB Rechargeable

Product Introduction:

• 🔒【Finger is Key】You don't have to worry about losing your keys or forgetting your password. 0.5S quick unlock. You will not spend more time fumbling around with your keys in the event of an emergency. Please note: Any skin can unlock the lock in the factory mode, please set the fingerprint for unlocking before use.
• 🔒【Long Run Time】The fingerprint locker lock equips with 150MAH rechargeable lithium battery, 1.5h for fully charged, it can unlock for about 2500 times in one charge. Please note: If the battery is in low or depleted level, and the lock can not read fingerprints, just connect to the power source and it will resume working.
• 🔒【Rugged Construction】The padlock beam is made of stainless steel and the lock body made by zinc alloy. It is weatherproof, anti-thief,anti-dust and anti-erosion, and excellent tamper resistance. Please note: it do not be recommended for long outdoor use in rainy or snowy weather).
• 🔒【1 Admin+9 User Fingerprints】You can authorize and share the smart padlock to your family/friend. No need for app, key, or bluetooth, friendly to kids and elderly. Please note: If any fingerprint still unlocks after setup, maybe the fingerprint do not be setup successfully, please reset it according to the instructions/video.
• 🔒【Lightweight and Portable】 It is just 120g, you can easily put the biometric padlock in your pocket to everywhere. The padlock is suitable both indoor and outdoor, for gym, school, office, door, gate, fence, garage, warehouse, cabinet, shed, suitcase, handbag, luggage, bike, etc.

Technical Parameters:

• Press and hold the reader for 6S.
• Blue lights flash, it is the collecting administrator fingerprint mode.
• Put the finger on the reader, if the blue light and the green light（or blue light and red light）flash alternately, please remove your finger, and press the administrator finger again until the green light stays on for 2S, and then remove and put administrator fingerprint some times, when the green light is on, and there is a "squeaking" sound, this collection succeeds. Note: If the red light flashes, this collection failed.
• Repeat the action of the third step 4 times again, then the administrator fingerprint sets successfully.

• Press and hold for 6S.
• Red and blue lights flash alternately, please verify the administrator fingerprint.
• Put the administrator fingerprint on the reader, if the red and blue lights flash ultimately, remove and put fingerprint on the reader some times until the blue light keeps flashing. It means that the administrator's fingerprint is verified.
• Put user's finger on the reader, if the red and blue lights flash alternately, take finger away, then put it again until the green light stays on for 2 seconds. Then remove and put finger some times until the green is on, and listen a "squeaking" sound, and then the light is off, it means the user's fingerprint collection succeeds. Note: If the red light flashes, this collection failed.
• Repeat the action of the fourth step for 4 times again, then the first user's fingerprint sets successfully.